Specifications

Keri Systems, Inc. Doors
TM
Users Guide
01914-005 Rev. 5.9 Section 5: Monitor and Update Controllers 5-37
2.1.1 Delaying the Network Update
If you would like the host computer to wait for a period of time until it uploads the new information to
the controllers, you may delay the start time of the update.
1. In the Update Delay field, use the spinners to select how long you want the host computer to wait
until it begins updating the network. For this example we will enter 1 minute (see Figure 5-37).
This means that the host computer will wait for 1 minute until it begins to update the network.
Figure 5-37: Update Delay
2. If there is a possibility the host computer will be unable to connect with the controllers, you may
indicate how many times the system should attempt a connection before canceling the update. Use
the spinner icons in the Retries field to select the number of attempts.
Figure 5-38: Delay Countdown Window
3. Click on the button to begin the countdown until the update operation will begin.
The progress of the countdown may be viewed through the Status windows (see Figure 5-38).
NOTE: While the host computer is waiting to upload to the network, you will not be able to use or close
Doors. You will not be allowed to properly shut down the host computer. You may cancel the countdown
at any time to use the system and resume the countdown when you are ready. When you resume, the
countdown will continue from the last full minute where it left off.