Specifications

Keri Systems, Inc. Doors
TM
Users Guide
01914-005 Rev. 5.9 Section 5: Monitor and Update Controllers 5-25
1.3 Saving and Archiving Event Files
There are two steps to saving and archiving event files.
• save events to file on the host computer’s hard disk
• archive files from the host computer’s hard disk to a CD, floppy disk, or computer network.
1.3.1 Save to File
The save to file fields allow an operator to determine which events should be stored in the event file on
the host computer’s hard disk when events are uploaded from the controllers to the host computer.
Many events are normal day to day activities that an operator may not want to have take up space on the
hard disk. The default is for all events to be saved to the event file on the hard disk.
In this example, the message text strings notifying when the controllers enable/disable Daylight Savings
time will be disabled so they will not be recorded to the event file on the host computer’s hard disk.
1. To access the message text strings to not be saved to file, click on the Setup ⇒ Monitor and Events
pull-down menu.
2. Click on the Messages tab. The Messages window appears (see Figure 5-11 on page 24 of this
section).
3. Use the scroll bar on the right side of the window and scroll through the list of message texts until
the “Daylight Savings Off” message text appears and scan across the row to the “Save To File”
column.
4. Click in the cell. It will change from an button to an button.
5. Locate the “Daylight Savings On” message text and scan across the row to the “Save To File”
column.
6. Click in the cell. It will change from an button to an button.
7. The messages tab window should look similar to Figure 5-12.
Figure 5-12: Save to File - After Changes
8. Click on the button. If the save to file change is not saved before clicking any other button
or exiting the Setup Monitor window, the data entered is lost and must be re-entered.