Specifications

Doors
TM
Users Guide Keri Systems, Inc.
5-24 Section 5: Monitor and Update Controllers 01914-005 Rev. 5.9
Figure 5-11: Elevator Reports Event - After Changes
NOTE: The “Controller Reports Event” and “Elevator Reports Event” columns override all other
columns. When either is turned “OFF”, the event will not be reported regardless of what is selected
in the other columns.
6. Click on the button. If the controller reports event change is not saved before clicking any
other button or exiting the Setup Monitor window, the data entered is lost and must be re-entered.
7. Now update the access control network with the new information. Click on the button on
the tool bar (for details on the update process refer to “Update the Network” on page 35 of this
section).