Specifications

Doors
TM
Users Guide Keri Systems, Inc.
1-8 Section 1: Installation of Doors 01914-001 Rev. 5.5
2. Press the letter C. The following screen appears.
KERI SYSTEMS INC. COMM TEST UTILITY
Plug in the Keri Loopback Test plug before starting the test.
Type C to set COM port
Type T to test COM port
Use icon in upper left to quit the program
PORT: COM2
STATUS: Untested
Enter 1 = COM1, 2 = COM2, 3 = COM3, 4 = COM4
3. Press the number corresponding to the COM port the host computer is using for communication
with the access control network (in this example, 2 is pressed). The following screen appears.
KERI SYSTEMS INC. COMM TEST UTILITY
Plug in the Keri Loopback Test plug before starting the test.
Type C to set COM port
Type T to test COM port
Use icon in upper left to quit the program
PORT: COM2
STATUS: Untested
4. Press the letter T. The following screen appears.
KERI SYSTEMS INC. COMM TEST UTILITY
Plug in the Keri Loopback Test plug before starting the test.
Type C to set COM port
Type T to test COM port
Use icon in upper left to quit the program
PORT: COM2
STATUS: Untested
Testing, please wait . . .