Specifications

Keri Systems, Inc. Doors
TM
Users Guide
01914-005 Rev. 5.9 Section 5: Monitor and Update Controllers 5-17
1.2.3 Assigning Events to be Monitored
The Print in View One, Two, and Three fields allows an operator to select the events that should be
displayed in each of the three monitor windows. The default is for View One to display all events and
for View Two and View Three to display no events.
Before assigning the events to be tracked by a monitor window, review the list of possible events and
identify the events that should be tracked. In this example, view three will be configured for monitoring
door access events. After reviewing the list of events, the following events will be selected for tracking
in monitor window three.
• Access Denied
• Access Granted
•Door Closed
• Door Forced Open
• Door Locked
• Door Not Opened
• Door Opened
• Door Opened Too Long
• Door Unlocked
1. To access the assigning events to be monitored commands, click on the Setup ⇒ Monitor and
Events pull-down menu.
2. Click on the Messages tab. The Messages window appears (see Figure 5-4).
Figure 5-4: Event Messages and Configuration Fields
3. Reviewing the above list, scroll down the “Message Text” column and locate the “Access Denied”
message text.
4. Scan across the access denied row to the “Print In View Three” column.
5. Click in the cell. It will change from an button to an button.
6. Scroll down the “Message Text” column and locate the “Access Granted” message text.
7. Scan across the access granted row to the “Print In View Three” column.
8. Click in the cell. It will change from an button to an button.
9. Repeat this process for the seven other message text strings.
10. The resulting window will look similar to Figure 5-5 on page 18 of this section.