Specifications

Keri Systems, Inc. Doors
TM
Users Guide
01914-005 Rev. 5.9 Section 5: Monitor and Update Controllers 5-9
Ctlr Comm Failure
Reported if communication with a remote site’s master controller was lost unexpectedly.
Ctlr Did Not Respond
Reported if a command is sent to a remote site’s master controller, but the controller does not respond,
acknowledging it received the command.
Ctlr Event Threshold
Reported by a controller whenever that controller reaches its event buffer threshold and it needs to
transfer/clear data from its buffer.
Ctlr Hard Reset
Reported if a hard reset (someone physically resetting the controller) occurs at a controller.
Ctlr Internal Error
Reported if a controller has an unidentifiable internal error.
Ctlr IO File Changed
Reported whenever an operator changes controller Input/Output data definitions.
Ctlr Key DB Corrupt
Reported if a controller’s keypad database (used for secondary verification of a cardholder) is corrupt,
invalidating its data.
Ctlr Mem Corrupted
Reported if a controller’s RAM memory is corrupted, disrupting controller operation.
Ctlr Self Test Failed
Reported if a controller’s power on self-test (POST) fails, or if a controller’s supply power either falls
too low or raises too high for proper operation.
Ctlr Warm Reset
Reported if a controller’s “watch-dog” timer expires (indicating the controller might be hung).
Ctlr/Door File Changed
Reported whenever an operator changes controller/door configuration information.
Daylight Savings Off
Reported when the controller’s clock disables the one-hour time change for daylight savings time.
Daylight Savings On
Reported when the controller’s clock enables the one-hour time change for daylight savings time.
Door Closed
Reported whenever a door closes following a valid access request.
Door Forced Open
Reported if a door has been forced open without a valid access request having been made.
Door Locked
Reported whenever a controller locks a door.
Door Locked by Operator
Reported whenever a door physically locks following a manual lock command issued by an operator.