Specifications

Doors
TM
Users Guide Keri Systems, Inc.
5-8 Section 5: Monitor and Update Controllers 01914-005 Rev. 5.9
Access Group Changed
Reported whenever an operator changes access group data.
Access Group Deleted
Reported whenever an operator deletes an access group.
All Doors Locked
Reported whenever the access control network performs a Global Secure command, locking all non-
timezone controlled doors in the access control network.
All Doors Unlocked
Reported whenever the operator performs a Global Unlock command, unlocking all doors in the access
control network.
Amnesty Granted
Reported whenever a user is granted APB amnesty at a controller and is allowed access.
APB Violation
Reported whenever a card was used twice-in-a-row at a door in an attempt to gain access to a secured
area without first leaving that area. This prevents a user from using a valid card to enter a controlled
area and then passing that card back for another person to use to enter that area.
Auto Collect Flag Off
Reported if the “Auto collection on buffer full warning” feature has not been enabled, configuring the
host computer to receive event data from controllers.
Auto Lock Restored
Reported whenever an operator restores a controller/door’s automatic locking feature.
Auto Lock Suspended
Reported whenever an operator suspends a controller/door’s automatic locking feature.
Autoconfig Performed
Reported whenever an operator performs the autoconfiguration command, polling all controllers for
information used to create the controllers database.
Card+PIN (P-650) PIN Entry Violation
Reported whenever a user’s attempt to enter a PIN after presentation of an access card is incorrect. To
be used only in connection with a P-650 Card+PIN Proximity Reader and Keypad.
Connect Refused - PIN
Reported whenever an operator’s attempt to log into a remote site was refused by the site’s master
controller because the operator did not enter the correct personal identification number (PIN) for the
site.
Connect Refused - Site
Reported whenever an operator’s attempt to log into a remote site was refused by the site’s master
controller because the operator does not have the authorization to access the site.
Ctlr Cold Reset
Reported if a cold reset (power cycling off and then on) occurs at a controller.
Ctlr Com Restored
Reported whenever communication with a remote site’s master controller is made.