Specifications

Doors
TM
Users Guide Keri Systems, Inc.
4-32 Section 4: Setup Users 01914-004 Rev. 5.2
2.2.6 Block Voiding Users
The Block and Void buttons allow an operator to select a number of users to be voided all at one time,
removing the users from the access control database without removing the cards from the database.
Cards can then be reassigned to new users while maintaining the history of those who held the cards in
the past.
1. Click on one of the following cells from the first user row to be voided.
•Last Name
•First
• Middle
• Enroll Date
• Enroll Time
•Void Date
•Void Time
2. Click on the button (see Figure 4-36).
Figure 4-36: Select the First Block Void User
3. There are three ways to block select the users to be voided. Use the method you find easiest.
• Click and hold on the first cell to copy and then drag the mouse down to the last user to void.
• Click on the first cell, hold the Shift key down, and click on the last user to void (see Figure 4-37 on
page 33 of this section).
• Hold the Ctrl key down and one-at-a-time click on the users to be voided. This method is best used
when users are not in sequential order.