Specifications

Keri Systems, Inc. Doors

Users Guide

01914-004 Rev. 5.2 Section 4: Setup Users 4-9

1.2.1 Enrolling Keri (Proximity) Cards by Presentation

1. For enrollment of Keri (Proximity) cards, click on the button. The Enroll Cards

window changes for Keri card presentation (see Figure 4-11).

Figure 4-11: Enroll Cards Window for Presenting Keri Cards to a Reader

2. Click on the button. If the Doors program is not connected to the access control

network, the program will automatically connect.

3. The “A” reader on the master controller is used for reading cards being enrolled. The reader’s LED

blinks green slowly to indicate it is ready for enrolling cards.

NOTE: The reader/controller is not available for any other use during the card enrollment process –

any attempts to use a door associated with the master controller might disrupt the card enrollment

process and will be denied until card enrollment is complete.

4. Skip to number 6 on page 10 of this section to continue the enrollment process.