Specifications

Keri Systems, Inc. Doors
TM
Users Guide
01914-004 Rev. 5.2 Section 4: Setup Users 4-7
Figure 4-7: Enrollment Results Window
14. Carefully examine the information displayed under Enrollment Results. This field will alert you to
the number of cards successfully enrolled and if there were any duplicates.
NOTE: If more than 100 cards are being enrolled at one time, the enrollment results display will show
the enrollment of cards increase in increments of 100 until the database slots for all cards being
enrolled have been created.
15. Click on the button to close the Enroll New Users window. The Setup Users
spreadsheet window now contains the newly enrolled cards (see Figure 4-8).
NOTE: If you are enrolling 26-bit Wiegand cards to be used with the Card+PIN feature, and have
selected the Card+PIN option in “Set Card+PIN (P-650) Mode” on page 22 in section 2, the card PIN
is automatically generated and placed in the Card+PIN column of the Setup Users spreadsheet.
Figure 4-8: Setup Users Spreadsheet Window With Block Enrolled Cards
16. Click on the button to save the enrollment. If the card enrollment information is not saved
before clicking any other button or exiting the Setup Users window, the data entered is lost and
must be re-entered.