Specifications

Keri Systems, Inc. Doors

Users Guide

01914-004 Rev. 5.2 Section 4: Setup Users 4-5

Figure 4-3: Proximity Card/Key Tag Number

6. Locate the Keri/Wiegand Card Number Range field. Click in the To field. Enter the card number

for the last

card in the range of cards to be enrolled (the highest number). The card number is the

second set of digits printed on the body of the card (in Figure 4-3, it is the digits corresponding to

187491). The card number will be more than 4 digits long. For example, the entire number of the

last card is K1757 187495; the card number is 187495.

7. Locate the Facility Code field. Click in the FACILITY CODE field and enter the facility code for

the cards. The default facility code value is 0 (zero).

NOTE: For Keri Proximity cards, facility codes may range from 0 to 31. For 26-bit Wiegand cards,

facility codes may range from 0 to 255. The facility code is programmed into each card. To enroll

cards, you must know the facility code programmed into the card. If you do not know the facility code

for the cards you are enrolling, please contact your card supplier for the facility code number before

continuing the card enrollment process.

NOTE: If you are block enrolling non-Keri Wiegand cards, be sure you know the actual internal card

numbers programmed into the cards and verify the internal numbers are in consecutive order. Using

incorrect numbers and non-consecutive cards invalidate the block enrollment process.

8. The default for User Assigned Card Numbers is to copy the card number from the Keri/Wiegand

Card Number Range field. If there is a need for user assigned card numbers that are different from

the card number printed on the body of the card, locate the User Assigned Card Numbers field.

Click in the Starting field. Enter the user assigned number for the first card in the set (the lowest

number). Numbers for the remaining cards will be assigned in ascending, sequential order from the

first number.

9. The resulting window should look similar to Figure 4-4.

Figure 4-4: Enroll Cards Window – Block Enrollment