Specifications

Doors

Users Guide Keri Systems, Inc.

4-4 Section 4: Setup Users 01914-004 Rev. 5.2

Figure 4-1: Setup Users Spreadsheet Window

2. Click on the button. If the Doors program is not connected to the access control network,

the program will automatically connect. The Enroll Cards window appears (see Figure 4-2).

Figure 4-2: Enroll Cards Window

3. If the cards to be enrolled are Keri Proximity cards, click on the button.

4. If the cards to be enrolled are 26-bit Wiegand cards, click on the button.

NOTE: If you are using a mixed PXL/EntraGuard system where users need to be given both a card and

a User ID, follow the instructions in “EntraGuard” on page 1 in section 10.

5. Locate the Keri/Wiegand Card Number Range field. Click in the Starting From field. Enter the

card number for the first

card in the range of cards to be enrolled (the lowest number). The card

number is the second set of digits printed on the body of the card (in Figure 4-3 on page 5 of this

section, it is the digits corresponding to 187491). The card number will be more than 4 digits long.

For example, the entire number of the first card is K1757 187491; the card number is 187491, 6

digits long.