Specifications
Doors
TM
Users Guide Keri Systems, Inc.
3-40 Section 3: Database Programming 01914-003 Rev. 5.4
4. Click on the arrow and a list of available alarm output values appears. Scroll through this list
and locate the desired door forced output value. For this example, click on Alarm Out.
5. Locate the “Door Held Output” column and click on the cell corresponding to the selected door.
6. Click on the arrow and a list of available alarm output values appears. Scroll through this list
and locate the desired door held output value. For this example, click on Disabled.
B-Door
1. To set the door forced and door held alarm output values, click on the Setup ⇒ System pull-down
menu or click on the tool bar button. Then click on the Doors tab. If the “Door Forced
Output” and “Door Held Output” columns do not appear in the window, use the scroll bar at the
bottom of the window and scroll to the right until these columns appear.
2. To set the B-Door alarm output, scan down the door name column and locate the door to have
alarm output values assigned.
3. Locate the “Door Forced Output” column and click on the cell corresponding to the selected door.
4. Click on the arrow and a list of available alarm output values appears. Scroll through this list
and locate the desired door forced output value. For this example, click on Output GP2.
5. Locate the “Door Held Output” column and click on the cell corresponding to the selected door.
6. Click on the arrow and a list of available alarm output values appears. Scroll through this list
and locate the desired door held output value. For this example, click on Output GP3.
7. The resulting window should look similar to Figure 3-28.
Figure 3-28: Set the Alarm Output Values
8. Once changes have been made, click on the button. If the changes are not saved before
clicking any other button or exiting the Setup System window, the data entered is lost and must be
re-entered.
9. Now update the access control network with the new information. Click on the button on
the tool bar (for details on the update process refer to “Update the Network” on page 35 in
section 5).