Specifications

Doors
TM
Users Guide Keri Systems, Inc.
3-30 Section 3: Database Programming 01914-003 Rev. 5.4
4.2.4 Assign a Reader Type (Usage)
The Reader Type (Usage) column allows an operator to identify the specific use of the reader. There are
four reader type options.
• Standard – used as a standard reader (default setting)
• In – used to control access into a secure area
• Out – used to control access out of a secure area
• Muster – used to track if someone has arrived at a specific location (used in connection with the
Rollcall/Track feature)
1. To assign a reader type, click on the Setup ⇒ System pull-down menu or click on the tool bar
button. Then click on the Doors tab (see Figure 3-21 on page 28 of this section).
2. Scan down the door name and controller/door address columns and locate a door to be assigned a
reader type.
3. Scan across the row and locate the “Reader Type” column.
4. Click on the arrow and a list of available usage reader types appears. Scroll up and down this
list and select the desired usage reader type.
NOTE: An EntraGuard controller should always be set for Standard usage.
5. Once changes have been made, click on the button. If the changes are not saved before
clicking any other button or exiting the system setup window, the data entered is lost and must be
re-entered.