Specifications

Keri Systems, Inc. Doors
TM
Users Guide
01914-003 Rev. 5.4 Section 3: Database Programming 3-23
4.1.1.3 Disable Controller Dial-Out
1. To disable the controller dial-out parameters, click on the Setup ⇒ System pull-down menu or click
on the tool bar button. Then click on the Controllers tab. The Controllers window appears
(see Figure 3-15 on page 22 of this section).
2. Scan down the controller addresses column and locate a controller that should not have permission
to initiate a connection with the host computer.
3. Scan across that controller’s row in the spreadsheet and locate the Dialout Enable button. If the
button is , controller dial-out is enabled.
4. To disable controller dialout, click on the Dialout Enable button. It will change to and the
text in the “Threshold Percent” column should change color from black to gray (see Figure 3-14 on
page 21 of this section). When this text is gray, the threshold percent value is not editable.
5. Once changes have been made, click on the button. If the changes are not saved before
clicking any other button or exiting the system setup window, the data entered is lost and must be
re-entered.
6. Now update the access control network with the new information. Click on the button on
the tool bar (for details on the update process refer to “Update the Network” on page 35 in
section 5).