Specifications

Doors
TM
Users Guide Keri Systems, Inc.
3-20 Section 3: Database Programming 01914-003 Rev. 5.4
4.0 Setup Controllers/Doors
The setup controllers/doors section describes how to configure controllers and doors on the access
control network. The following operations are performed in this section.
Controller Configuration
set controller dial-out parameters
enable/disable anti passback
set a PXL-250W/PXL-500W’s Wiegand reader type (LED control)
Door Configuration
assign a descriptive door name
assign a door class
assign a door type
assign a usage reader type
enable/disable access through a door
set a doors unlock time
set a doors open time
set a doors unlock/lock time zone
set a doors first person in value
set a doors door forced and door held open alarm output modes
set a doors primary and auxiliary RTE configuration
NOTE: It is not necessary to update the network following each step. However, in order for any
changes made to be applied to the network, an update must be completed.