Specifications

Keri Systems, Inc. Doors
TM
Users Guide
01914-003 Rev. 5.4 Section 3: Database Programming 3-17
3.0 Configure Dedicated I/O Points
This section describes the process for configuring the dedicated input and output points to be used by
the system. Certain input/output points on a PXL-250/PXL-500 Controller or SB-293/SB-593 Satellite
board are automatically dedicated to input/output functions (i.e. the Door-A RTE input, the Door-A
door switch input, the Door-A alarm output, the Door-A lock output). However, if controllers/doors in
an access control network need to use the Auxiliary RTE input or need to have separate annunciation of
Door Forced and Door Held Open alarms, the inputs and outputs required to perform these functions
must be assigned/dedicated to these functions (see Figure 3-11). This will enable the appropriate options
within the controllers and doors databases so that these features can be implemented.
Figure 3-11: Input/Output Points Available for Dedicated Assignment