User`s manual

BIOS Setup Information
RUBY-9719VG2AR User’s Manual 4-38
USB 2.0 Controller
Set to [Enabled] if you need to use any USB 2.0 device in the operating system that
does not support or have any USB 2.0 driver installed, such as DOS and SCO Unix.
Audio Controller
This setting Enable the onboard Audio controller.
LAN1 Controller
This setting Enable the onboard Ethernet controller.
LAN2 Controller
This setting Enable the onboard Audio controller.
LAN1 PXE Controller
When [Enabled], the BIOS attempts to boot from a LAN boot image before it
attempts to boot from a local storage device.
The choice: Disabled, Enabled.
4.11 Exit
This menu allows you to load the BIOS default values or factory default settings into
the BIOS and exit the BIOS setup utility with or without changes.