User`s manual

BIOS Setup Information
RUBY-9719VG2AR User’s Manual 4-35
Initiate Graphic Adapter
Select which graphics controller to use as the primary boot device.
The choice: IGD, PCI/IGD, PCI/PEG, PEG/IGD, PEG/PCI.
Internal Graphics Mode Select
Select the amount of system memory used by the internal graphics device.
The choice: Enabled, 1MB, Enabled, 8MB.
PEG Port
This setting allows you to select whether to use the on-chip graphics processor or
the PCI Express card. When set to [Auto], the BIOS checks to see if a PCI
Express graphics card is installed. If it detects that a PCI Express graphics card is
present, the motherboard boots up using that card. Otherwise, it defaults to the
onboard graphics processor.
The choice: Auto, Disabled.
Video Function Configuration