User`s manual

BIOS Setup Information
RUBY-9719VG2AR User’s Manual 4-31
LAN1 Controller
This setting Enable the onboard Ethernet controller.
LAN2 Controller
This setting Enable the onboard Audio controller.
LAN1 PXE Controller
When [Enabled], the BIOS attempts to boot from a LAN boot image before it
attempts to boot from a local storage device.
The choice: Disabled, Enabled.
4.8 Exit
This menu allows you to load the BIOS default values or factory default settings into
the BIOS and exit the BIOS setup utility with or without changes.
Exit Saving Changes
Exit System Setup and save your changes to CMOS. Pressing <Enter> on this item
asks for confirmation: Save changes to CMOS and exit the Setup Utility.
Discard Changes and Exit
Abandon all changes and exit the Setup Utility.