Instruction manual

GUIDE TO INSTALLATION AND OPERATION
34 | HCO-1822
Note: There is no need to select a profile using the Profile pulldown (e.g. current, User1, etc.) when restoring a
profile from disk. The profile selection is stored within the file.
Copy profile to section
This line shows other HCO-1822 cards that are available on the iControl network, each identified by App server,
Densité frame and slot number, card type and firmware version.
The Profile column shows the same information as is shown for the current card in the Copy profile from line, i.e.
• Current, User1, User2, User3, User4, User5
The Select column includes a checkbox to identify which HCO-1822 cards you wish to copy profiles into from the
current card.
• For convenience, a Select all checkbox is provided in the column header
Click Copy to copy the selected profiles from this card into the selected other HCO-1822 cards
• While the profile copy operation is in progress, the Transfer Status box on the right of the Copy profile to line will
indicate Working against a yellow background
• When the profile copy operation is complete, the Transfer Status box on the right of the Copy profile to line will
indicate Succeeded against a green background