Instruction manual

GUIDE TO INSTALLATION AND OPERATION
HCO-1822 | 33
Copy Profile From:
This line shows this HCO-1822 card, and identifies it by App server, Densité frame and slot number, card type and
firmware version.
The Profile column has a pulldown that allows you to select which profiles
you will work with, and gives these choices:
• Current, User1, User2, User3, User4, User5
The Select column includes a checkbox, preselected as checked, to
confirm that you want to work with the current card.
Save Profile to Disk…
Click this button to open a Save dialog allowing you to
specify a file name and location to which the selected profiles
for this card will be saved.
Hint - It is a good idea to create a folder for these files,
because they are not explicitly identified as HCO-1822
profiles, and will be difficult to find and identify if not clearly
named and conveniently located.
• Click the save button once the name and location have
been identified in the Save box
• If the file is saved correctly, the Transfer Status box on
the right of the Copy profile from line will indicate
Succeeded against a green background
• If the file was not saved for some reason, the Transfer
Status box to the right of the Copy profile from line will
indicate Failed against a red background
Restore profile from disk…
Click this button to open an Open dialog box within which you
can locate and select a valid HCO-1822 profile file.
• Click Open to read the contents of the file and to
reconfigure this HCO-1822’s profiles according to its
contents
• While the reconfiguration is in progress, the Transfer
Status box on the right of the Copy profile from line will
indicate Working against a yellow background
• When the reconfiguration is complete, the Transfer
Status box on the right of the Copy profile from line will
indicate Succeeded against a green background
Figure 3.45 Select Profile to copy
Figure 3.47 Open a profile file to restore profiles
Figure 3.46 Save profile dialog