Instruction manual

GUIDE TO INSTALLATION AND OPERATION
HCO-1822 | 25
3.4.11 The Thumbnail panel
The thumbnail area displays thumbnail images for the
inputs and outputs selected in the Player area.
Player – Click the checkboxes to select which thumbnails
will be displayed. Only those whose Control checkbox has
been selected will be available.
• Input 1
• Input 2
• Program output
• Preview output
If only one is selected it will appear full screen, otherwise
those selected will appear in a grid as shown in the figure.
Control – Click the checkboxes to apply the Mode, Format,
Quality and Refresh Rate settings to the these thumbnails.
Mode – select between Video mode and Test mode. Use
Video mode for normal operation.
Format – choose the thumbnail size:
• small, medium, large
Quality – choose the quality of the displayed image
• Poor, Normal, HiQ
Refresh Rate – select the desired refresh rate from the pull-down box. The choices are:
[Fast, 1 sec, 2 sec, …, 9 sec, 10 sec.]
3.4.12 The Options panel
Two options are available for the HCO-1822:
• Clean Switch Option (HCO-1822-OPT-CS)
• ALC Option (HCO-1822-OPT-ALC-X)
To activate each of these options, you must
• Obtain a licence key from Miranda Technologies Inc.
• Type the licence key in the Enter Key box
• Click on ENABLE OPTION to enable the option’s features.
Figure 3.32 Thumbnail Panel