INSTALLATION & OPERATING INSTRUCTIONS ELECTRONIC PANIC LOCK MODELS 250,2501,260 & 260L PANIC U HARDWARE @ LISTED 198G Al ALARM LOCK SYSTEMS, INC. 345 Bay view Ave.
OPERATING INSTRUCTIONS BEFORE INSTALLING THE LOCK COVER: 1). Select. For continuous alarm, leave the black jumper plug-on-the terminal strip, -as installed CFO wo Miguel AU AIA SHOWN, Overtime The Bi Eek jumper plug farm the Terminal strip. 2) Connect the battery connector 1o the 0 volt battery servings th proper polarity. A short beep will sound ensuring that the lock is powered and ready, 3) Install the lock cover with four (4) screws supplied. 4 Close the door. OPERATIONAL TESTING 13.
INSTALLATION & OPERATING INSTRUCTIONS EI ELECTRONIC PANIC LOCK MODELS 250,250,260 & 260L INSTALLATION 11 With the door closed, select the” proper template and tape it to the inside face of the door with the. center line approximately 387 above he (oon per empire directions.
Ory aw Eat Lon is ghz Ba Soh Scroungy. ELECTRONIC PANIC LOCK ACCESSORIES: FINISH BACK PLATE MODEL 767 Required 10 conceal the open back of the kick body when ted on a glass door. mounts Stainless Steel 4%” x 8%". DOUBLE DOOR KEEPER MODEL 732 DEADWOOD 10 the surface of the inductive IGT doors. Plated Ass Aura ABROGATED DOOR LOOP MODEL 271 For use with Elected Jocks. Ari easy means for DRI BIOTECH CUBICAL ro the hinge aids of & road traitor tie door. 16° exile ‘armored cable.
