Installation Guide

2 3
LED reference
Not illuminated - Power off
Solid green - Connected to Alarm.com
Blinking green - Local network connection
Blinking green and red - Reverting to factory default settings
Blinking red - Power on, camera booting
Solid red - No local or Internet connection
Installation
Service provider technician - MobileTech installation
❶ Log in to MobileTech.
❷ Select the customer’s account.
❸ Tap Quick Actions > Add Device > Video.
❹ Follow the on-screen instructions.
Ethernet mode
Complete these steps prior to installing
the camera in its final location:
❶ Connect the camera to the router via an Ethernet cable.
❷ If the Ethernet connection does not provide power,
connect the camera to the optional AC power adapter
(sold separately) and plug the adapter into a
non-switched outlet.
❸ Wait 2 minutes for the camera to boot up and connect
to the Internet. The LED will be solid green when this
process is complete.
❹ Add the device to the account by either selecting
the account in MobileTech or by using a web browser
and entering the following URL: www.alarm.com/
addcamera (you will need the customer username
and password).