Operator`s manual

OPERATION

EM 1700,2200,2200F,2500 04/09 Operation Section 4-17

OPERATION

• Ensure each hydraulic cylinders are installed

andretained correctly. Ensure the proper size

pinsare used to retain the cylinders in place

and aresecured with pins.

• Check for hydraulic oil leaks on the cylinders,

alongthe hydraulic lines, and at tractor

hydraulic ports.IMPORTANT: DO NOT use your

hands to checkfor oil leaks. Use a piece of

heavy paper orcardboard to check for hydraulic

oil leaks. OPS-T-0024

Do not operate this Equipment with hydraulic oil or fuel leaking. Oil

and fuel are explosive and their presence could present a hazard. Do

not check for leaks with your hand! High-pressure oil streams from

breaks in the line could penetrate the skin and cause tissue damage

including gangrene. To check for a hose leak, SHUT the unit ENGINE

OFF and remove all hydraulic pressure. Wear oil impenetrable gloves,

safety glasses and use Cardboard to check for evidence of oil leaks. If

you suspect a leak, REMOVE the HOSE and have it tested at a Dealer.

If oil does penetrate the skin, have the injury treated immediately by a

physician knowledgeable and skilled in this procedure.

(SG-15)

• Inspect tire condition, wheel bearings, and lug

nut torque.

• Inspect all bolts and screws and tighten to the

recommended torque. OPS-T-0018