Operator`s manual

ASSEMBLY
EM 1700,2200,2200F,2500 04/09 Assembly Section 3-4
© 2009 Alamo Group Inc.
ASSEMBLY
REAR MAINFRAME
Installing V-Ripper Extensions or Wings
1700 and 2200:
1. Install outer wing frames using ¾” x 2" GR8 bolts (1) and locknuts (2)
2200F and 2500:
1. Place inner v-ripper frame and outer v-ripper frame on ground beside each other.
2. Connect the two v-ripper frames using 17" v-ripper hinge pin (3).
3. Insert bolts (4) and locknuts (5) to hold hinge pin in place.
4. Install both inner and outer v-ripper frames using ¾” x 2" GR8 bolts (1) and locknuts (2).
5. Toque 3/4” x 2" GR8 bolts to 400 ft.-lbs.