Operator`s manual

SAFETY
EM 1700,2200,2200f,2500 04/09 Safety Section 1-10
SAFETY
© 2009 Alamo Group Inc.
Use extreme care when climbing onto the Equipment to perform repairs, maintenance, and
cleaning. Use proper stands and ladders to access areas that cannot be reached from
ground level. Slipping and falling off the Equipment can cause serious injury or death.
(SSB-
25)
Transporting Safety Instructions and Practices
E
xerc
i
se care w
h
en
h
an
dli
ng
th
e
di
scs.
Di
sc
bl
a
d
es are
SHARP
an
d
HEAVY
.
W
ear g
l
oves
at all time to protect your hands.
(STL-10)
Do not use your hands or feet to clean the disc gangs. The discs are sharp and serious
injures could result from inadvertent contact with the discs. Never attempt to stand on the
discs, tires, or frame members of the implement.
(STL-11)
Relieve hydraulic pressure prior to doing any maintenance or repair
work on the Implement. Place the Implement on the ground or
securely blocked up, disengage the PTO, and turn off the tractor
engine. Push and pull the Remote Cylinder lever in and out several
times. Disconnect and remove the Implement hydraulic hoses from
the tractor prior to starting any maintenance or repair work.
(STL-17)
Never attempt to remove a jam or service the implement until the Implement Hydraulic
Hoses have been DISCONNECTED AND REMOVED from the tractor. Serious body injury
or death can result from entanglement with the rotating components of the conveyer.
(STL-25)
Make certain that the “Slow Moving Vehicle” (SMV) sign is installed in
such a way as to be clearly visible and legible. When transporting the
Equipment use the Tractor flashing warning lights and follow all local
traffic regulations.
(SG-6)