Installation guide

1-8 Alacritech Accelerator Hardware Installation Guide (Copper)
Relative humidity:
5% to 85% non-
condensing
Relative humidity:
5% to 85%, non-
condensing
Relative humidity:
5% to 85%, non-
condensing
EMC
Standards
Compliance
ANSI/IEEE 802.3,
2000 Edition
Ethernet.
(1000BaseT,
100BaseTX,
10BaseT)
FCC, CE, VCCI
ANSI/IEEE 802.3,
2000 Edition
Ethernet.
(1000BaseT,
100BaseTX,
10BaseT)
FCC, CE, VCCI
ANSI/IEEE 802.3,
2000 Edition
Ethernet.
(1000BaseT,
100BaseTX,
10BaseT)
FCC, CE, VCCI
Diagnostic
LEDs
Link speed
(10,100,1000),
network activity
and 3.3V detect
Link speed
(10,100,1000) and
Link/network
activity
Link speed
(10,100,1000) and
Link/network
activity
1.4 Accelerator Diagrams
Figure 1 contains a diagram of the LED locations and port of the
1000x1 and SES1001T Accelerator. LEDs show link, activity, and
speed on the end bracket.
The LED on the top of the card shows that the card is being
supplied with 3.3V power. The card will not operate unless this
LED is lit.