Installation guide

Alacritech Accelerator Hardware Installation Guide (Copper) A-5
quality when connecting this device. For 100BASE-TX operation, your
network cables must be Category 5, twisted pair wiring. For 10BASE-T
operation, use Category 3, 4 or 5 twisted-pair wiring. If you use this
adapter in a residential environment, you must use Category 5 cables.
Changes or modifications not expressly approved by Alacritech could void
the user’s authority to operate this equipment.
VCCI Declaration of Conformity
The 100000, 100001, 100004, 100005, 100007, 100009, SEN1001T,
SEN1001F, SES1001T, SES1001F, SEA1001T, SEA1001F, SEN2002XT,
SEN2002XF, SEN2001XT, SEN2001XF, SES2002XT, SES2002XF,
SES2001XT, SES2001XF, SEA2002XT, SEA2002XF, SEA2001XT,
SEA2001XF, SEN2104ET, SEN2104EF, SEN2102ET, SEN2102EF,
SES2104ET, SES2104EF, SES2102ET and SES2102EF are Class B
products based on the standard of the Voluntary Control Council For
Interference by Information Technology Equipment (VCCI). If this is used
near a radio or television receiver in a domestic environment, it may cause
radio interference. Install and use the equipment according to the
instruction manual.
EN Declaration of Conformity
The 100000, 100001, 100004, 100005, 100007, 100009, SEN1001T,
SEN1001F, SES1001T, SES1001F, SEA1001T, SEA1001F, SEN2002XT,
SEN2002XF, SEN2001XT, SEN2001XF, SES2002XT, SES2002XF,
SES2001XT, SES2001XF, SEA2002XT, SEA2002XF, SEA2001XT,
SEA2001XF, SEN2104ET, SEN2104EF, SEN2102ET, SEN2102EF,
SES2104ET, SES2104EF, SES2102ET and SES2102EF have been tested
in accordance with the application of Council Directive 89/336/EEC,
Article 4a. Conformity is declared by the application of EN55022 Class B
(CISPR 22), EN55024, and EN60950.
Compliance to class B may be dependent upon the use of shielded data
cables depending upon the host hardware
.