Installation guide

Alacritech Accelerator Hardware Installation Guide (Fiber) 1-9
1.4 Accelerator Diagrams
Figure 1 contains a diagram of the LED locations and port for the
1000x1F and SES1001F Accelerator. LEDs show link and activity
on the end bracket.
The LED on the top of the card shows that the card is being
supplied with 3.3 V power. The card will not operate unless this
LED is lit.
Figure 1: 1000x1F and SES1001F Accelerators
3.3V Detect LED
Activity LED
Link LED