Installation guide

Alacritech Accelerator Users Guide: Microsoft Windows Edition 4-1
4 Windows Server Core 2008
Windows Server Core 2008 uses a command line interface rather than the familiar
Windows graphical user interface. This chapter describes how to install the Alacritech
drivers and configuring the Accelerator for teaming and VLAN using the Slicutil com-
and line utility.
Slicutil.exe is not installed when the driver is installed, but may be found in the distribu-
tion package under the \tools folder.
Note: Slicutil does not offer all of the management options available through
the normal Windows device properties described in Section 3. Check the
Alacritech website for availability of an updated version.
4.1 Installing Alacritech Drivers
For server core 2008, use the command line install method described in section 2.4
4.2 Interface Commands
You can verify that the drivers installed successfully with netsh:
C:\Temp> netsh int show int
Admin State State Type Interface Name
----------------------------------------------------------------------
Enabled Connected Dedicated ob1_10net
Enabled Connected Dedicated ob2_csl
Enabled Connected Dedicated Local Area Connection 2
Enabled Connected Dedicated Local Area Connection 3
Enabled Connected Dedicated Local Area Connection 1
Or with slicutil:
C:\Temp> slicutil interface list
ID Type Connection Name Member VLANs
=============================================================
7 SEN2102ET Local Area Connection 2 No No
12 SEN2102ET Local Area Connection 3 No No
9 SEN3001EF Local Area Connection 1 No No