Installation guide

Alacritech Accelerator Users Guide: Microsoft Windows Edition 3-23
3.6.4 EtherChannel/802.3ad Teaming Guidelines and Restrictions
 If you disable a port in a team, it is treated as a link failure and its traffic is
transferred to one or more of the remaining ports in the team.
 Configure all ports in a team to operate at the same speed and duplex mode
(full or half duplex).
 Ensure that all ports in a team have the same configuration on both ends of the
link.
 Teaming is not supported in a Team that combines 10GbE and 1GbE ports.
Adding a 10GbE port to a 1GbE Team (or vice-versa) will change it automati-
cally to Hot Stand-by Fail-over.
3.6.5 Removing Teaming
1. Open the Properties window as described in Section Error! Reference
source not found. and select the Teaming tab.
2. Select the team you want to dissolve.
3. Click the Dissolve Team button.