Installation guide

Alacritech Accelerator Users Guide: Microsoft Windows Edition 3-3
3.2 Running Adapter Diagnostics
Diagnostics can be run on any Accelerator using the following procedure:
1. Open the Properties window as described in Section Error! Reference
source not found..
2. Select the Diagnostics tab.
1GbE Diagnostics
10GbE Diagnostics
Note: Running Diagnostics will disrupt the port of the Accelerator under test.
Note: The Teaming Driver Version will indicate “Not Loaded” until a Team is
created.
3. Click the Run Tests button. A warning will appear. Click the Yes button to run
the tests.