Installation guide

Alacritech Accelerator Users Guide: Microsoft Windows Edition 2-2
2.2 Software Installation
The following procedure applies whether installing a new Alacritech Accelerator or up-
dating the driver of an existing Accelerator.
1. Install the Alacritech Accelerator using the procedure in the Alacritech Hard-
ware Installation Guide.
2. Once the hardware has been installed, start the system. If the Found New
Hardware Wizard appears, press Cancel.
3. Insert your Alacritech Driver Installation CD into the system. Select the ap-
propriate installation. If the installation is launched from the install.htm page on
the CD, and default security settings are set on the browser, there may be sev-
eral pop-ups asking if you want to run this package.
Once you select run, the setup wizard will launch.