Installation manual

Alacritech Accelerator Users Guide 2-7
8. Once the hardware has been installed, start the system.
On start up the Microsoft Found New Hardware Wizard
will be launched. When the Found New Hardware
Wizard is launched, decide whether you want to
connect to Windows Update or install drivers that
shipped with the product. Select an option and Click
Next to continue
9. Selecting No, not this time will prompt the Found New
Hardware Wizard to locate the drivers. Since the drivers
were installed in a previous step select Install the
software automatically.
2-8 Alacritech Accelerator Users Guide
10. A dialog box titled Hardware Installation may appear.
This should only occur when using drivers that are not
certified through the Microsoft Designed for Windows
Logo process. Most official drivers released by
Alacritech have appropriate digital signatures, while
others, including beta drivers, do not. A missing digital
signature does not prevent the Alacritech drivers from
working properly on your system.
Click the button titled Continue Anyway to install the
driver without a digital signature. This dialog box will
appear each time the driver is installed for an adapter
port. Be sure to click the Continue Anyway button