Installation manual

Alacritech Accelerator Users Guide 3-17
4. Select the Advanced tab to access the properties that are
available for the selected Accelerator:
The following settings are available under the Advanced tab:
Link Speed & Duplex – This option allows for the direct setting of
the data transmission rate. The default for this setting is Auto
Detect. The available options for this setting are shown in the
following table:
3-18 Alacritech Accelerator Users Guide
Media Setting Description
10Mbps Full
Duplex
Sets data rate to a maximum of 10
megabits per second bi-directionally
10Mbps Half
Duplex
Sets data rate to a maximum of 10
megabits per second unidirectionally
100Mbps Full
Duplex
Sets data rate to a maximum of 100
megabits per second bi-directionally
100Mbps Half
Duplex
Sets data transmission rate to a
maximum of 100 megabits per second
unidirectionally
1000 Mbps
Full Duplex
Sets data transmission rate to a
maximum of 1000 megabits per
second bi-directionally
Copper
Auto Detect
The controller will detect the optimum
data transmission rate for a given
connection
1000 Mbps
Full Duplex
Sets data transmission rate to a
maximum of 1000 megabits per
second bi-directionally
Fiber
Auto Detect
The controller will detect the optimum
data transmission rate for a given
connection. It will negotiate 1000
Mbps Full Duplex
The default value for Link Speed & Duplex is Auto Detect.
TCP Checksum Offload – The TCP Checksum Offload option will
allow the Accelerator to offload the TCP checksum for TCP data
transmitted and received when the Accelerator has the TCP Offload
option disabled. Because Alacritech’s SLIC Technology offloads