Installation manual

Alacritech Accelerator Users Guide 3-5
2. Click the Run Tests button.
3. A warning will appear. Click the Yes button to run the tests.
4. The adapter will then run through self-test of the IPP and
the selected Accelerator. A properly functioning board will
display Passed for all results.
5. If you wish to obtain more information on the adapter, click
the Adapter Details button.
3-6 Alacritech Accelerator Users Guide
6. Click the Close button to exit Adapter Details.
7. Click the OK button to exit the application.
3.3 Updating Flash Code
The mechanism for flashing code on flash-capable Accelerators is
provided through device manager. The PXE/UNDI drivers for
Alacritech Accelerators allow PXE and iSCSI software boot
solutions to work. Note that these drivers do not include a BIOS-
level iSCSI boot driver, and that a third-party iSCSI boot software
package is needed for complete iSCSI boot support.
The latest PXE drivers are available from Alacritech’s web site in
the Support section.
To install the latest flash code on an Accelerator, follow these steps: