Installation manual

Alacritech Accelerator Users Guide 2-15
2.4 Uninstalling the Accelerator
2.4.1 Removal of an Accelerator
1. The Windows operating system will disable the driver
software automatically. If you subsequently install a
card after removal, the Found New Hardware wizard
will install the driver. With Release 9 and later, it is not
necessary to uninstall the Alacritech Accelerator with
the Hardware Manager prior to moving/removing the
card.
2. Shut down the computer, and unplug the power cable.
Failure to do so may endanger you, and may damage
the adapter or computer.
Note: Alacritech Accelerators use components that are
sensitive to ESD. Proper ESD handling and
storage should be followed.
3. Remove the computer cover, and remove the Alacritech
Accelerator.