User Manual
GB
C a re o f th e m o to r
Changing the m otor oil
1. Have a suitable container ready to collect the used
oil.
2. Drain or suction off all the oil through the oil filler
opening.
Changing the air filter
■ Follow the instructions of the manufacturer of the
motor.
Changing the spark plug
■ Follow the instructions of the manufacturer of the
motor.
W h ee l d riv e (o ptio n al)
Adjusting the Bow den cable
If the wheel drive can no longer be switched on or off
while the motor- is running, the related Bowden cable
needs to be adjusted.
1. Turn the adjuster on the Bowden cable in the
direction of the arrow ( O 30).
2. To test the cable setting, switch on the motor and
switch on the wheel drive.
3. If the wheel drive is still not working, the lawnmower
must be taken to a service point or an authorised
specialist.
L u b ric atin g th e d riv e p in ion
■ Allow the motor to cool down
■ To save storage space, fold the handlebar down
(C l 31, 32)
■ Store the equipment in an area which is kept dry,
and which cannot be accessed by children or
unauthorised persons
■ Store the starter battery where it will be protected
from frost
■ Recharge the starter battery from time to time
■ Drain the fuel tank
■ Pull out the spark plug connector
R e p a irs
Repairs should be carried out only by a service point or
an authorised specialist.
D is p o s a l
Do not dispose o f old equipm ent,
batteries or accum ulators as household
waste!
Machine, packaging, and accessories were made
with recyclable materials, and should be disposed of
accordingly.
■ From time to time, lubricate the dnve pinion on the
transmission shaft
□
The wheel drive gearing is maintenance free.
H
Dispose of used motor oil in a manner that is
compatible with the environment!
W e recommend to collect the used oil in a closed
container and to deliver it to a suitable recycling
or service station.
Used oil should not be
■ disposed of with domestic rubbish
■ poured into the sewage system or drains
■ poured out onto the ground
S to r a g e
Caution - risk o f explosion!
Do not store the equipment where there are
naked flam es or heat sources.
A
Caution!
Adjust the Bowden cable only when the motor is
switched off.
470 591_c 33