User Manual

GB
■
Rem ove cuttings only when the motor has stopped ■ Store petrol and oil only in containers intended for
■
Switch off the motor / mower blade when passing
this purpose
over areas other than those that have to be mowed ■ Only add or drain oil in the open air, and when the
■
Never lift or carry the equipment while the motor is
motor has cooled down
running ■ Do not add petrol or oil while the motor is running
■
Do not eat or drink when topping up the petrol or ■ Do not overfill the tank (petrol expands]
motor oil
■ Do not smoke when refuelling
■
Do not inhale the petrol fumes
■ Do not open the tank lock when the motor is
■
Move the machine at walking speed
running or when hot
■
Before use, ensure that all nuts, screws and bolts
■ Replace the tank or tank lock if damaged
are securely fastened.
■ Always close the tank cap firmly
■ If petrol has been spilt:
A s s e m b ly
Follow the accompanying assembly instructions.
Caution!
The equipment can be used only after complete
assembly.
F u e llin g
Fill the lawnm ower with fuel before the initial startup.
^ W arning - risk of fire!
Petrol and oil are highly inflammable!
I I Always observe the operating instructions sup-
plied by the motor manufacturer.
O p e ra tin g flu id s
Petrol M otor oil
Grade Regular petrol /
unleaded
Refer to the motor
manufacturer's
instructions
Filling
capacity
Refer to the motor
manufacturer's
instructions
about 0.6 l
S a fety
W arning!
Never leave a motor running in an enclosed
space. Toxic hazard!
■ Do not start the motor
■ Do not start the equipment
■ Clean the equipment
■ If motor oil has been spilled:
■ Do not start the motor
■ Soak up the spilled oil with an oil binding agent
and dispose of appropriately
■ Clean the equipment
□ Used oil should not be:
■ disposed of with domestic rubbish
■ poured into the sewage system, drains, or
onto the ground
W e recommend to collect the used oil in a closed
container and to deliver it to a suitable recycling or
service station.
A d d in g p etro l
1. Unscrew the tank cap, and keep in a clean place.
2. Pour in petrol using a funnel.
3. Firmly replace the cap on the filler opening and
clean it.
A d d in g m o to r oil
1. Unscrew the filler cap, and keep in a clean place.
2. Pour in oil using a funnel.
3. Firmly replace the cap on the filler opening and
clean it.
■
470 591_c 25