operation manual

GB
56 CS 4030
Installation
■
Protective glasses or face
visor incorporated in the
protective helmet
■
Protective trousers with cut
protection inlay
■
Sturdy working gloves
■
Safety boots with high-grip
sole and steel toe caps
■
Do not use the chain saw
above shoulder height, since
safe handling is no longer
possible in this way.
■
When changing position,
switch off the engine and put
on the chain guard.
■
When chain saws are not in
use, always put on the chain
guard and remove the re-
chargeable battery.
■
Switch the chain saw off be-
fore putting it down.
■
Do not use the chain saw for
levering or moving wood.
■
Only specialist personnel are
allowed to saw trunks that are
thicker than the length of the
chain bar.
■
Only start the cut once the
saw chain is running, never
switch on the chain saw al-
ready in the kerf.
■
Make sure that no saw chain
oil gets onto the ground.
■
Do not undertake sawing work
in the rain, snow or stormy
weather.
■
Never disable safety and pro-
tective devices.
4 INSTALLATION
WARNING!
Danger of serious injury.
If an incompletely mounted
chain saw is used, serious
injury can be caused.
■
Only use the chain saw
when it has been fully
mounted.
■
Before each use, per-
form a visual inspection
in order to check that
the chain saw is com-
plete and does not con-
tain damaged or worn
components. Safety and
protective devices must
be intact.