operation manual

GB
48 CS 4030
Safety instructions
Power tools are dangerous if
they are used by inexperi-
enced people.
■
Look after power tools and
the insertion tool with care.
Check whether moving
parts function perfectly and
do not stick, whether there
are any broken parts or
parts that are damaged in
such a way that the function
of the power tool is im-
paired. Have damaged parts
repaired before using the
power tool. Many accidents
are caused by failure to main-
tain power tools properly.
■
Keep cutting tools sharp
and clean. Carefully main-
tained cutting tools with
sharper cutting edges are less
likely to stick and are easier to
control.
■
Use power tools, accesso-
ries, insertion tools, etc. ac-
cording to these instruc-
tions. When doing so, take
account of the working con-
ditions and the activity to
be undertaken. Using power
tools for applications other
than the intended purpose
can result in dangerous situa-
tions.
■
Keep the grips and grip sur-
faces dry, clean and free
from oil and grease. Slippery
grips and grip surfaces pre-
vent safe operation and con-
trol of the power tool in un-
foreseen situations.
3.5 Safety in the workplace
■
Keep your working area
clean, and make sure it is
well illuminated. Untidiness
or dimly lit working areas can
lead to accidents.
■
Do not work with the power
tool in a potentially explo-
sive atmosphere with the
presence of flammable liq-
uids, gases or dust. Power
tools give rise to sparks that
can ignite the dust or vapours.
■
Keep children and other
people away from the power
tool when using it. If you are
distracted, you may lose con-
trol of the power tool.
3.6 Use and handling of the
rechargeable battery-
operated tool
■
Only recharge batteries with
chargers that are recom-
mended by the manufactur-
er. Using a charger intended
for one particular type of re-