Operation Manual

CONTENTS
PAGE CONTENTS
1. GENERAL NOTICES
2. ATC APPLICATION & SAFETY INFORMATION
3. SYSTEM REQUIREMENTS & OPERATING INSTRUCTIONS
4. LED OPERATION
5. TROUBLESHOOTING, MAINTENANCE & WARRANTY
6. PUSH ROD REMOVAL
GENERAL NOTICES
READ AND ACT IN ACCORDANCE WITH THE
FOLLOWING OPERATING INSTRUCTIONS BEFORE
ATTEMPTING TO USE AL-KO ATC. THIS INSTRUCTION
MANUAL SHOULD BE KEPT EITHER IN THE CAR OR
CARAVAN AT ALL TIMES.
AL-KO ATC is a safety related product and,
therefore, should only be fitted by an authorised
AL-KO trained technician with experience of
working with electrical installations.
Any evidence of removal or disassembly, other
than by trained technicians, will immediately
invalidate the product warranty.
1 2
AL-KO ATC TRAILER
CONTROL SYSTEM
AL-KO ATC IS AN ELECTRONIC, EMERGENCY
CONTROL SYSTEM FOR CARAVANS AND TRAILERS.
IT AUTOMATICALLY RECOGNISES CRITICAL
SWINGING MOTIONS AND APPLIES THE CARAVAN
BRAKES ACCORDINGLY TO REGAIN CONTROL OF
THE CARAVAN AND CAR.
SAFETY INFORMATION
AL-KO ATC IS A PASSIVE SAFETY PRODUCT
THAT ACTIVATES THE BRAKING SYSTEM ON THE
CARAVAN IN UNSAFE DRIVING CONDITIONS.
The driver has a responsibility under law to
ensure that the elements of towing safety are
met, including driving within the legal speed limit,
consideration of road, weather and other traffic
conditions, correct loading and coupling of the
caravan.
AL-KO ATC is designed to fit only on AL-KO
Chassis and is not suitable for non AL-KO Chassis.
AL-KO ATC only functions on caravans with a rigid
towbar.
The electrical connection between the towing
vehicle and caravan must be in good working
order.