Datasheet

ITP16/ITP16-G
Temperature indicator
The ITP16 is a temperature indicator for monitor-
ing and control of industrial processes. This display
features a configurable analog input for various
RTD, TC or linear voltage signals and a digital out-
put. The NPN transistor output makes it possible
to implement on-off control with a low voltage
relay up to 42 V DC / 200 mA.
The process indicator ITP16 also supports an alarm
function. If this function is on, the display starts
blinking with the frequency of about 2 Hz when
the process value exceeds the set points.
This device has a compact, standardised design
and fits into a standard 22.5 mm borehole. This
provides quick and easy installation and many dis-
plays can be accommodated in a control cabinet
door or on a panel.
Functions and features:
• Measuring and displaying the signal valuesre-
ceived from various RTDs and thermocouples
• Linear voltage signal scaling
• Adjustable decimal point position
• ON/OFF control with NPN output
• Display range -999…+9999
• Square root function (for special transmitters)
• Digital filter
• Alarm function (blinking when the exceeding
set points)
• Error indication when the input signal is out
of range
• Error indication when wire break or short
circuit
We will be glad to assist you! Tel.: [phone]
Standard
variants
Description Enclosure
ITP16
ITP14 with red display
color
48 x 26 x 65 mm
Panel mount
ITP16-G
ITP14 with green
display color
48 x 26 x 65 mm
Panel mount
Analog input for TC and RTD signals
LED color: red or green
Powered by 24 V DC
Digital output with NPN type
Easy mounting in Ø 22.5 mm borehole
Accuracy 0.2%
Save time for installation
IP Code
Compact size
Ambient temperature
Can be installed in a push-button box
Ordering code: