Data Sheet

We will be glad to assist you! Tel.: [phone]
LED Bar Graph Display
The ITP15 Bar Graph Display is a compact process
indicator that is intended to visualize an analog
input signal in the range from 0 to 100% with 10
bars 10% each. The input signal can be either a
linear voltage signal of 0(2)-10 V or a current sig-
nal of 0(4)-20 mA.
Due to cylindrical form of the mounting part of
the enclosure, the device can be positioned either
vertically or horizontally without changing the
mounting cutout. The ITP15 fits into a standard
cutout of Ø22.5 mm. The cutouts of the same di-
ameter are commonly used for mounting standard
signal lamps or push buttons at control cabinets
or panels.
Along with indication, a simple on-off control can
be implemented with the NPN transistor output of
the ITP15. This output can control a load of up to
200 mA, 42 VDC.
Functions and features:
• Bar graph indication of the measured value
• Display range 0...100%
• 10 two-color bars (green/red) 10% each
• Configurable analog input (0-5 mA, 0(4)-20
mA, 0(2)-10 V)
• ON/OFF control with an NPN-transistor out-
put
• 2 modes of blinking (fast/slow)
• Alarm settings
ITP15
Configurable input for linear current
or voltage signals
10 two-color bars
Power supply
NPN-transistor output (42V DC, up to
200mA)
Alarm function
Push-button box installation option
Effortless installation in a Ø 22.5 mm
mounting cutout
IP Code (on front)
Save time for installation
Ambient temperature
Compact size