User manual

Installation
akYtec GmbH · Vahrenwalder Str. 269 A · 30179 Hannover · Germany · Tel.: [phone] · www.akytec.de
6
5 Installation
The device is designed for switch panel mounting in a borehole of Ø22.5 mm (see An-
nex A for dimensional drawings).
Carefully position the supplied gasket on the display rear surface. Insert the cylindrical
part of the device into the borehole and tighten the nut from the rear side of the switch
panel.
Fig. 2
Panel
Gasket
Nut
Body