Instructions

4 Configuration and programming
7
akytec GmbH - Vahrenwalder Str. 269 A - 30179 Hannover - Germany Tel.: [phone] - www.akytec.de
4.3 Analog inputs
Open the node Inputs > Analog in the open window Device configuration (Fig. 4.1) and select an
input for configuration.
Abb. 4.1 Analog input configuration
For quick access select an input in the circuit program and use Property Box (Fig. 4.2) to set the
parameters. The parameter Input mode has to be set first.
ACHTUNG
Ensure that the input signal is connected to the correct input terminals and that the input
configuration corresponds to the signal. Non-observance can cause damage to the device.
Abb. 4.2 Property Box for analog input
4.3.1 Analog mode
Configurable parameters:
– Input mode – select Analog
– Analog filter – filter time constant (sect. 4.3.3)
– Input signal – 4-20 mA, 0-10 V.