Instructions

Appendix B Calibration
25
akytec GmbH - Vahrenwalder Str. 269 A - 30179 Hannover - Germany Tel.: [phone] - www.akytec.de
Set the three points for calibration curve and the filter time constant.
The greater the filter time constant, the longer the calibration process will take, but the more
accurate calculation of the coefficients will be achieved.
Select the input to calibrate. If you select All, all inputs will be calibrated sequentially, therefore
the appropriate reference signal has to be applied to all inputs.
7. Click Next and follow the instructions.
Click the item Reset settings to use the default calibration setting.