Instructions

PRM
PRM_0028_EN
© All rights reserved. Subject to technical changes and misprints.
akYtec GmbH · Vahrenwalder Str. 269 A · 30179 Hannover · Germany
Tel.: [phone] · www.akytec.de
Table 4 Terminal assignment
№
Designation
Function
№
Designation
Function
1
AC230V L / DC24V -
Power supply AC / DC *
13
DO1
Digital output DO1
2
AC230V N / DC24V +
Power supply AC / DC *
14
-
Common contact DO1...DO2
3
COM1
Common minus pole DI1...DI4
15
DO2
Digital output DO2
4
DI1
Digital input DI1
16
DO3
Digital output DO3
5
DI2
Digital input DI2
17
-
Common contact DO3...DO4
6
DI3
Digital input DI3
18
DO4
Digital output DO4
7
DI4
Digital input DI4
19
DO5
Digital output DO5
8
COM2
Common minus pole DI5...DI8
20
-
Common contact DO5...DO6
9
DI5
Digital input DI5
21
DO6
Digital output DO6
10
DI6
Digital input DI6
22
DO7
Digital output DO7
11
DI7
Digital input DI7
23
-
Common contact DO7...DO8
12
DI8
Digital input DI8
24
DO8
Digital output DO8
* Depending on the device modification (PRM-230 or PRM-24)
a
b
Fig 4 Connecting 3-wire sensors with PNP transistor
outputs
Fig 3 Connecting switch contacts to digital inputs: a) PRM-24, b) PRM-230
Fig 5 Relay outputs
Transportation and storage:
Pack the device in such a way as to protect it reliably against impact for storage and transportation. The original packaging provides optimum protection.
If the device is not taken immediately after delivery into operation, it must be carefully stored at a protected location. The device should not be stored in
an atmosphere with chemically active substances.
Permitted storage temperature: -25...+55 °C
Relative humidity: up to 95% (at +35°C, non-condensing)
►
NOTICE
The device may have been damaged during transportation.
Check the device for transport damage and completeness!
Report the transport damage immediately to the shipper and akYtec GmbH!
Scope of delivery:
– PRM 1
– Short guide 1
– Cable 1
– Terminals blocks (set) 1